Basic Setup Wizard

Note:

Connection to the Internet is only possible if you have entered all the data of your Internet provider correctly.

ìSelect how Internet sessions are to be established via the Connection mode:

–Select Always on if the connection is to remain set up when the Gigaset SE366 WLAN is switched on.

Note:

If you subscribe to a time-based service, this option can result in high connection charges.

–Select Connect on demand if applications such as a Web browser or an e-mail program are allowed to connect to the Internet automatically.

–In the Idle time before disconnect field, enter a period of time after which the Internet connection is to close down automatically if no data is transmitted (default setting: 3 minutes, range: 1 to 99 minutes).

This time setting only applies to the Connect on request option. A permanent connection is achieved using the Always on option.

–Select Connect manually if you always want to establish and end the connection to the Internet manually. If you subscribe to a time-based service this will save you high connection charges. How to establish a connection manually is described on page 82.

ìClick Test Settings to check the Internet connection. The device will attempt to con- nect to the Internet. Any existing Internet connection will be closed first.

You will find information about the test steps and results on the Internet Connec- tion Test screen.

PPPoE pass-through

PPPoE pass-through enables you to use an additional Internet connection (with another service provider) from one PC. You can find detailed information about this on page 47.

ìActivate PPPoE pass-throughif you wish to use this function.

Using UPnP (Universal Plug & Play)

PCs with UPnP (Universal Plug & Play) can offer their own network services and automatically use services offered on the network. You can find detailed information about this on page 48.

ìActivate UPnP if you wish to use this function.

ìClick Next >.

33