First steps

 

 

Element

Description

 

 

WAN

Socket for connecting to the DSL modem.

LAN4 – LAN1

Four 10/100 Mbps switch ports with automatic recognition (RJ45).

 

You can connect up to four Ethernet devices (such as PCs, a Hub

 

or Switch).

 

 

Reset

The reset button is located behind the small opening labelled Reset.

uReboot function (software reset): Press the button for longer than 1 second but less than 5 seconds to reboot the device. This does not affect the configuration settings.

uReset function (returns to factory settings): Press and hold the button for at least 5 seconds to return all settings to the factory settings.

Warning: This will clear all the configuration settings you have made since the initial startup. This also applies for the data generated with WPS for the wireless network (SSID and pre-shared key).

Setting up the Gigaset SE366 WLAN

The Gigaset SE366 WLAN can be set up in any suitable location in your home or office. You do not need any special wiring. However you should comply with the following guidelines:

uPlace the device away from heat sources, direct sunlight and other electrical devices. u Do not place the device on a heat-sensitive surface.

uDo not place objects on the device. Ensure that all air openings for air circulation are not blocked.

uLay the cables so that nobody can trip over them. u Position the device on a non-slip surface.

uA suitable socket as well as a connection to the Ethernet interface of a PC or a wired network must be available in the place where you set up the Gigaset SE366 WLAN.

uDo not position the device in the immediate vicinity of stereo equipment, TV sets or microwave ovens. This may cause interference.

uFor wall mounting: Make sure not to damage any pipes or cables in the wall when drilling the dowel holes.

21