First steps
Connecting to the mains power supply
Note:
Only use the mains adapter (12V DC 1A) that is supplied with the device.
ìConnect the mains adapter cable to the 12 V DC 1A socket on the Gigaset SE366 WLAN.
ìPlug the mains adapter into a mains socket.
Connecting PCs wirelessly via WPS
If you are using WPS (see page 13), you can connect wirelessly to other WLAN devices quite simply via the registration button.
ìPress the registration button for at least two seconds on the device’s back panel to start WPS registration.
ìWithin two minutes, activate WPS registration of the wireless network adapter on the PC. The client gets the security data for the Gigaset SE366 WLAN (SSID and
WLAN LED display during WPS registration:
On (300 s) | WPS registration was successful. |
Flashing slowly | WPS registration is in progress. |
Flashing quickly | WPS registration was not successful. |
Flashing quickly | More than one client tried to register. |
with interruption |
|
Only one client is allowed to register during a single registration phase. If the device indicates by means of the WLAN LED that more than one client has tried to register, and the desired client has not been registered successfully, an external device may have connected to your WLAN. In this case, you should change the
23