Security settings

Selecting from the list of known PCs

ìSelect the required PC from the Known wireless clients list. All PCs that are currently logged in to the router with the correct SSID are displayed.

ìClick Add to add the selected PC to the list.

Note:

uIf you have activated MAC access control and want to use WPS, please note that only clients already included in the MAC address list can register via WPS.

uIf you activate MAC access control, you must at least enter the PC from which you are configuring the Gigaset SE366 WLAN. If you fail to do this, you will no longer be able to access the user interface and an error message will be shown.

uIf, by mistake, you have denied all PCs access to the Gigaset SE366 WLAN you have two options:

You can reset the Gigaset SE366 WLAN to the factory settings (see page 20).

You can connect a PC to the Gigaset SE366 WLAN using one of the LAN con- nections (by cable). Since MAC access control only applies to PCs that are connected "wirelessly", you can use this PC to change the configuration.

ìTo go to the next step, click Next >.

Saving settings

On the next screen you close the wizard and save the settings. You will be informed of any security risks that still exist.

ìClick Finish to close the wizard.

The settings will now be active on your Gigaset SE366 WLAN.

Note:

You must now configure the WEP or WPA key for your PC's wireless network adapter, if this has been configured with other values. Once you have done this you can log in to your Gigaset SE366 WLAN wirelessly again.

43