Adjusting the SOUND SET with

EASY SET UP

EXECUTE

CURSOR >/./?//

You can set the center mode for the PROLOGIC and THEATER sound fields, and the relative volume level of the center and rear speakers for the PROLOGIC sound field with EASY SET UP. (For sound field explanations, see page 75.)

1Complete each operation other than SOUND SET with EASY SET UP referring to pages 13 to 30.

2After the CENTER MODE selection menu appears, press ?//to select the center mode.

See “Selecting the center mode” on page 32 for details.

 

 

 

 

 

 

 

 

SET UP

 

 

SOUND SET

 

 

CENTER MODE

 

 

 

 

 

WIDE

 

 

SET

:

 

 

 

 

 

 

 

 

 

 

NEXT

:

EXECUTE

 

 

 

 

 

 

 

 

3Press EXECUTE.

Each speaker emits the test tone in turn (the speaker emitting the test tone is indicated by the red speaker mark).

Check each speaker’s relative volume balance with the test tones.

 

 

 

 

 

 

 

 

 

 

SET UP

 

 

SOUND SET

 

 

CENTER MODE

 

 

CENTER

 

0 dB

 

 

 

 

 

 

REAR

 

0 dB

 

 

 

 

 

 

 

 

 

TEST TONE

 

 

SELECT

:

 

 

 

 

 

 

 

 

SET :

 

 

 

 

END

:

EXECUTE

 

 

 

 

 

 

 

 

 

 

 

 

 

4Press CURSOR >/.to move the cursor (I) to CENTER. Then, press CURSOR ?//to increase or decrease the volume of the center

speaker so you have an equal volume balance with the other speakers at your listening position.

If you selected PHANTOM in step 2, skip this step.

This volume adjustment affects only the PROLOGIC sound field.

 

 

 

 

 

 

 

 

 

 

SET UP

 

 

SOUND SET

 

 

CENTER MODE

 

 

CENTER

 

+8 dB

 

 

 

 

 

 

REAR

 

0 dB

 

 

 

 

 

 

 

 

 

TEST TONE

 

 

SELECT

:

 

 

 

 

 

 

 

 

SET :

 

 

 

 

END

:

EXECUTE

 

 

 

 

 

 

 

 

 

 

 

 

30 Getting Started