Attaching a UHF/VHF band mixer

When using both 75-ohm coaxial cable and 300-ohm twin lead cable for VHF/UHF antenna, use the EAC-66 UHF/VHF band separator/mixer (not supplied) to connect the antenna to the VCR.

300-ohm twin lead cable

EAC-66

UHF/VHF band separator/ mixer (not supplied)

75-ohm coaxial cable

1Loosen the screws on the mixer.

2Wind the twin leads around the screws on the mixer.

3Retighten the screws.

4Connect the 75-ohm coaxial cable to the mixer.

Additional Information

93