Troubleshooting (continued)
| Symptom | Remedy | |
Amplifier | There’s no sound or only a | • | Check that the speakers and components are connected |
| very |
| securely. |
|
| • | Press MUTING if the (muting) indicator is displayed on the |
|
|
| TV screen or the MASTER VOLUME indicator on the unit |
|
|
| flashes. |
|
| • | The headphones are connected to PHONES. Disconnect the |
|
|
| headphones. |
• The protective device on the unit has been activated because of a short circuit. (“PROTECT” appears in the display window.) Turn off the unit, then eliminate the cause of the
The left and right sounds are unbalanced or reversed.
•Check that the speakers and components are connected correctly and securely.
•Adjust BALANCE L/R on the unit.
Severe hum or noise is heard.
•Check that the speakers and components are connected correctly and securely.
•Check that the connecting cords and cables are away from a transformer or motor, and at least 3 meters away from a TV set or fluorescent light.
•Place your TV away from the audio components.
•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
No sound or a very
•Select the appropriate center mode.
•Adjust the speaker volume appropriately.
•Make sure you turn on the sound field surround mode function.
•Make sure you select a suitable sound field for the playback source.
The surround effect cannot be heard.
•Make sure you turn on the sound field function.
•Make sure you select a suitable sound field for the playback source.
Remote | The remote commander does |
commander | not function. |
•Make sure you are pointing the remote commander at the remote sensor on the unit or equipment you want to control.
•Replace all the batteries in the remote commander with new ones if they are weak.
•Make sure you press the correct remote commander function button to set the remote commander for the equipment you want to control.
•Remove obstacles in the path of the remote commander and the receiver.
96 | Additional Information |
|
|