Basic VCR / Radio Operations
Playing a video tape
MASTER VOLUME
6EJECT
VHS TUNER
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
|
| MASTER VOL |
>10 | 0 | +/– |
0REW
SMART CUE )FF
P PAUSE
·PLAY
p STOP
Tips
•The unit turns on if you insert a tape while the power is off.
•The counter resets to “0H00M00S” whenever a tape is inserted.
Note
•The unit’s sound won’t be reproduced through the TV unless the speaker connectors or TAPE/MD REC OUT jacks are connected to the TV. Normally, the speakers connected to the unit reproduce the sound.
Before you start...
•Turn MASTER VOLUME to the leftmost position (0) to avoid damaging your speakers.
1 Press VHS TUNER.
•If the TV doesn’t turn on, turn it on manually.
•If connected with only the antenna cable, set the TV to the video channel.
2 Insert a video tape.
The unit’s VCR starts playing automatically if you insert a tape with its safety tab removed.
3 Press · PLAY.
When the tape reaches the end, it will rewind automatically.
4 Press MASTER VOL +/– on the remote commander to adjust the volume.
Additional tasks
To | Press |
Stop play | pSTOP |
Pause play | PPAUSE |
Resume play after pause | PPAUSE or ·PLAY |
Search forward | During playback, press and hold )FF. |
| To resume normal playback, release the button. |
Search backward | During playback, press and hold 0REW. |
| To resume normal playback, release the button. |
) FF during stop | |
Rewind the tape | 0REW during stop |
Eject the tape | 6EJECT |
To skip playback
You can skip a portion of playback you don’t want to watch such as a commercial and restart playback by pressing a single button.
Press SMART CUE during playback of s scene you want to skip. The VCR starts searching.
Press SMART CUE again when you find the scene you want to watch. The VCR stops searching, rewinds a few seconds, then resumes normal playback.
continued
Basic VCR / Radio Operations | 47 |
|
|