Step 3

Speaker systems hookup

To get the best possible sound from the unit, connect front (left and right), center, and rear (left and right) speakers. You need to connect either the center or rear speakers as well as the front speakers to enjoy Dolby Pro Logic Surround sound.

Before you connect...

•Prepare speaker cords (one for each speaker) (not supplied).

(+) (+)

(–)

(–)

• Be sure to match the speaker cords to the appropriate terminals on the components: + to +, and – to –. (If the cords are reversed, the sound will be distorted and the bass sound will not be reproduced well.)

• Do not connect the AC power cord until you finish all the connections through “Step 5 : TV antenna or cable hookups” on page 11.

• Be sure to make connections firmly to avoid hum and noise.

Rear right speaker

 

 

 

Center speaker

 

 

 

Rear left speaker

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Active woofer

 

Front right speaker

 

Front left speaker

 

 

 

1

Connect the front speakers to the FRONT SPEAKERS L/R connectors.

Twist about 15 mm of the stripped ends of the cord. Then insert the stripped ends into the connectors as shown on the right.

FRONT

R

SPEAKERS

L

 

(+)

(–)

2

Connect the center speaker to the SURROUND SPEAKERS CENTER connectors.

Repeat step 1 above for the center speaker.

If you don’t have a center speaker, skip this step.

SURROUND R-REAR-L

(+)

(–)

SPEAKERS CENTER

6

Getting Started