Controlling an MD deck
1 2 3
Number
4 | 5 | 6 | buttons/>10 |
|
|
| |
7 | 8 | 9 |
|
>10 | 0 |
|
|
=/+AMS PPAUSE
)FF/0 REW ·PLAY
p STOP
rREC
(
Customizing the remote commander for an MD
deck
The remote commander is not factory set to control MD decks. So you need to customize the function button corresponding to the jacks the MD deck is connected to. For example, if you connect the MD deck to the TAPE/MD jacks, customize TAPE/MD for the MD deck in the following way.
While pressing the function button (e.g. TAPE/MD), press number button 3.
The function button is customized to control the MD deck.
You can customize the VIDEO 1, VIDEO 2, CD, TAPE/MD, or TV function buttons. To change the button’s function again, see “Customizing the remote commander function buttons” on page 91.
Playing an MD
1Press the function button you customized for the MD deck, and turn on the MD deck.
The unit turns on and switches the input source to the jacks the MD deck is connected to.
2Insert an MD referring to your MD deck’s operating instructions.
3Press ·PLAY.
The MD deck starts playing.
Additional tasks
To | Press |
Stop play | pSTOP |
Pause play | PPAUSE |
Resume play after pause | PPAUSE or · PLAY |
Scan forward or backward | And hold ) FF or 0 REW during |
| playback |
Locate the beginning of other | =/+AMS repeatedly |
tracks |
|
To locate a track with the number buttons
Press one of the number buttons for single digit numbers (except 0). To locate the 10th track, press 1, then 0.
To enter a track number over 10, first press >10, then any number button for the tens digit except 0, and the number button for the ones digit.
Examples of entering the
To | Press |
Enter 30 | >10, then 3, and 0 |
Enter 24 | >10, then 2, and 4 |
continued
Audio/Video Equipment Operations | 71 |
|
|