Additional Information
Customizing the remote commander function buttons
COMMAND
MODE
|
|
| Function | |
|
|
| buttons | |
1 | 2 | 3 |
| |
4 | 5 | 6 | Number | |
buttons | ||||
|
|
| ||
7 | 8 | 9 |
| |
>10 | 0 |
|
|
Notes
•You cannot customize the
VHS TUNER, VHS LINE, and TUNER function buttons.
•The COMMAND MODE selectors on both the remote commander and unit (the actual selector’s name on the unit is VTR COMMAND MODE) are factory set to VTR3.
The function buttons on the remote commander have two roles. One is to select the input sources (see “Selecting the equipment” on page 59) and the other is to switch the remote commander to operate the selected piece of equipment. The function buttons are factory set for the unit’s VCR, a radio tuner, CD player, cassette deck (deck B for
Factory set functions
Press | Then, the remote commander operates |
VHS TUNER | The unit’s VCR (The COMMAND MODE selector |
| determines the controllable VCR.) |
VHS LINE | Same as above |
VIDEO 1 | Same as above |
VIDEO 2 | Same as above |
TUNER | Same as above |
CD | A CD player |
TAPE/MD | A single cassette deck or deck B of a |
TV | A TV |
To customize the function buttons
To control | While pressing one of the | |
|
| function buttons, press |
|
|
|
A CD player | 1 | |
A DAT deck | 2 | |
An MD deck | 3 | |
A single cassette deck or | 4 | |
Deck B of a |
| |
A single cassette deck or | 5 | |
Deck A of a |
| |
An LD player | 6 | |
A VCR if its COMMAND MODE |
| |
position/format is |
| |
| VTR1/Betamax | 7 |
| VTR2/8mm | 8 |
| VTR3/VHS | 9 |
A TV | 0 |
To restore the factory settings for all the function buttons
Remove the batteries from the remote commander, and insert the batteries again.
To restore the factory settings for VIDEO1 or VIDEO2
See “To relate VIDEO1 or VIDEO2 with COMMAND MODE again” on page 63.
Additional Information | 91 |
|
|