Controlling a DAT deck
6OPEN/CLOSE
1 2 3
4 5 6
7 8 9
>10 0
=/+ AMS PPAUSE
)FF/0REW ·PLAY
p STOP
6OPEN/
CLOSE
Customizing the remote commander for a DAT
deck
The remote commander is not factory set to control DAT decks. So you need to customize the function button corresponding to the jacks the DAT deck is connected to. For example, if you connect the DAT deck to the TAPE/MD jacks, customize TAPE/MD for the DAT deck in the following way.
While pressing the function button (e.g. TAPE/MD), press number button 2.
The function button is customized to control the DAT deck.
You can customize the VIDEO 1, VIDEO 2, CD, TAPE/MD, or TV function buttons. To change the button’s function again, see “Customizing the remote commander function buttons” on page 91.
Playing a tape
1Press the function button you customized for the DAT deck, and turn on the DAT deck.
The unit turns on and switches the input source to the jacks the DAT deck is connected to.
2Press 6OPEN/CLOSE to open the cassette cover/holder.
If the cassette cover/holder doesn’t open, refer to your DAT deck’s operating instructions.
3Insert a cassette.
4Press ·PLAY.
The deck starts playing a tape.
Additional tasks
To | Press |
Stop playing | pSTOP |
Go to the next track | +AMS |
Go to the preceding track | =AMS |
) FF or 0 REW during stop | |
Monitor the sound during | ) FF or 0 REW during playback. |
To resume normal playback, release | |
| the button. |
Eject the cassette | 6OPEN/CLOSE during stop |
continued
rREC
Audio/Video Equipment Operations | 69 |
|
|