Sony SLV-AV100C, SLV-AV100U Selecting the equipment

Audio/Video Equipment

Operations

Selecting the equipment

SYSTEM OFF

Function buttons

1 2 3

4 5 6

7	8	9	MASTER VOL
>10	0		+/–

MUTING

MASTER VOLUMEMUTING Function buttons

You can control the connected audio and video equipment with this remote commander. Before operating any equipment, press the function button corresponding to the equipment. Note that all equipment must be made by Sony to control with the remote commander.

Controlling the function buttons

The function buttons of the remote commander have the following three roles.

•Turning on the unit and related piece of equipment (excluding audio components).

•Switching the input source.

•Switching the remote commander to operate the selected equipment (see the sections for controlling each piece of equipment from page 62 to 74).

To change the input source, you can also use the function buttons on the unit.

The following tables show the relationship between the function buttons (on the remote commander and unit) and the input source.

Function buttons on the remote commander (SYSTEM CONTROL/ FUNCTION)

Press	The following	And the unit’s input switches
	indication appears on	to the
	the TV screen
VHS TUNER	channel number	Unit’s VCR
VHS LINE	LINE	LINE (VIDEO IN, AUDIO L/R
		IN) jacks
VIDEO1	VIDEO1	VIDEO1 (VIDEO IN, AUDIO L/R
		IN) jacks
VIDEO2	VIDEO2	VIDEO2 INPUT (VIDEO, AUDIO
		L/R) jacks
TV*1	(TV)*2	TV (VIDEO, AUDIO L/R IN) jacks
CD	CD	CD (AUDIO L/R IN) jacks
TUNER	TUNER	Unit’s FM/AM tuner
TAPE/MD	TAPE/MD	TAPE/MD (AUDIO L/R IN) jacks

*1 If the TV is connected to the unit with only the antenna cable, the unit’s speakers do not reproduce the sound even if you press this button. When you use the TV tuner, press TV CONTROL ON (see “Controlling other TVs with the remote commander” on page 65).

*2 “TV” usually doesn’t appear on the TV screen. If another monitor is connected to the MONITOR VIDEO OUT jack, “TV” appears on the monitor screen.

Audio/Video Equipment Operations 59