Controlling the Monitor Image

You can monitor the camera image on the monitor window of the main viewer.

Monitoring the camera image

1 Log in to the homepage to display the main viewer. To log in, see “Logging in as a user” on page 15.

Camera the Operating

2 Select the frame rate (only when the camera image is in JPEG).

Click the Frame rate list box to select the frame rate for transmitting the image. Selectable frame rates are as follows.

SNC-RZ50N

1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30 fps

SNC-RZ50P

1, 2, 3, 4, 5, 6, 8, 12, 16, 20, 25 fps

The number refers to the frame number transmitted per second.

For example, if you select 30 fps for SNC-RZ50N, the image is sent at the maximum speed of the connected line (30 fps maximum).

Note

The selected value indicate the maximum number of frame rate that can be transmitted.

The number of frames actually transmitted may vary depending on network environments and camera settings (image size and image quality settings).

3 Select the view size.

Click View size list box to select the view size from Auto, 640 × 480, 320 × 240, or 160 × 120.

Auto is determined by the image size specified in the Camera menu (page 36)

Zooming in the monitor image

1 Click .

2 Click the point you want to zoom in.

The image is magnified by about 1.5 times with the clicked point at the center.

The digital zoom icon changes to .

3 To cancel zooming in, click .

20 Controlling the Monitor Image