This item becomes active when Tour is set to On. With this item, you can select whether you restart or stop the tour after it has stopped by manual pan, tilt or zoom operation or by camera movement to the preset position triggered by an alarm.
On: Specify the wait time before the tour restarts, between 5 and 600 seconds. The tour restarts automatically after the specified time has elapsed.
Off: The tour does not restart.
Tour A to Tour EConfigure Tour A to Tour E respectively.
Each tour setting consists of 5 items: On/Off, Effective period, Stay time, Speed and Sequence.
On: The tour operates.
Off: The tour does not operate.
Effective period
Select the period during which the tour in activated.
Always: The tour can be activated any time.
Schedule: The tour is activated according to the schedule you have set.
Click Schedule, and the menu for the effective period is displayed. (“Setting the Schedule — Schedule Menu” on page 63.)
Note
You cannot set tours if the effective periods overlap each other.
Stay time
Type a period of time during which the camera is to stay at each preset position, between 1 and 3600 seconds.
Speed
Select the speed of camera movement between 1 and 23, or Fastest from the
Sequence
Set the sequence of the tour.
The preset positions saved using the Position tab are displayed in the
Select the preset position from the
If you specified an unnecessary preset position, click to select it in the list and click then Delete.
To change the order in the list, click to select the preset position and then click Up or Down.
Note
The tour cannot be set to On if no preset position is added in the Sequence list.
OK/Cancel
Camera the Administrating
Saving the Camera Position and Action — Preset position Menu | 49 |
|
|