Tip
The factory setting of the camera network is as follows.
IP address: 192.168.0.100
Subnet mask: 255.0.0.0
Wireless LAN setting
Type: Adhoc
SSID:
Channel: 11 ch
WEP: Nothing
IP address: 10.0.0.100
Subnet mask: 255.0.0.0
The welcome page of the network camera is displayed on the web browser.
Note
If the IP address is not set correctly, the welcome page does not appear after step 12. In that case, try to set the IP address again.
Accessing the Camera Using the Web Browser
After the IP address has been assigned to the camera, check that you can actually access the camera using the Web browser installed on your computer.
Use Internet Explorer as the Web browser.
1 Start the Web browser on the computer and type the IP address of the camera in the URL box.
The welcome page is displayed.
2 Click Enter.
The main viewer is displayed.
If the main viewer is displayed correctly, accessing the camera is confirmed.
Preparation
Accessing the Camera Using the Web Browser 11