![](/images/backgrounds/199366/199366-9426x1.png)
Camera the Operating
Controlling Alarm
Output 1, 2
You can control On
To use this function, you need to make Alarm output 1 or Alarm output 2 active in the Trigger menu of the Administrator menu (page 62).
1 Display the image on the monitor window.
2 Select Alarm output1 or Alarm output2 from the trigger
3 Click .
Each click switches the alarm output alternately between On
Tip
For the connection of peripheral devices to the alarm output of the I/O port, see the supplied Installation Manual.
Controlling Day/Night Function
You can control the Day/Night function On (night mode) and Off (day mode).
To use this function, you need to make Day/Night active in the Trigger menu of the Administrator menu (page 62).
1 Display the image on the monitor window.
2 Select Day/Night from the trigger
3 Click .
Each click switches the Day/Night function alternately between On (night mode) and Off (day mode).
Note
If Day/Night mode in the .
26 Controlling Alarm Output 1, 2 / Controlling Day/Night Function