Camera the Administrating

4 Click OK at the bottom of the window.

The cropped image is displayed on the main viewer.

5 To close the image, click in the upper-right corner.

Frame rate

Set the frame rate of the image.

Selectable values of the frame rates are as follows.

SNC-RZ50N:1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30 (fps)

SNC-RZ50P:1, 2, 3, 4, 5, 6, 8, 12, 16, 20, 25 (fps)

The number refers to the frame number transmitted per second.

Image quality (for JPEG only)

Set the quality of JPEG image.

Selectable values are from Level 1 to Level 10. When Level 10 is selected, the best image quality is achieved.

Bandwidth control (for JPEG only)

Limits the network bandwidth for the JPEG image data output from the camera. Selectable bandwidths are as follows:

0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0 (Mbps), and

Unlimited

Note

Audio may be interrupted depending on the selected bandwidth. In that case, select a wider bandwidth.

Bit rate (for MPEG4 only)

Set the bit rate of MPEG4 image transmission for a line. Selectable values are as follows:

64, 128, 256, 384, 512, 768, 1024, 1536, 2048 (kbps)

Notes

•The actual frame rate and bit rate may be different according to the image size, the shooting scene, or the network condition.

•When MPEG4 is selected, the image size is set to 640 × 480 (VGA) and the frame rate is set to 30 fps. The frame rate may be decreased when the bit rate is more than 512 kbps or while the object detection function is operating.

•When the camera operation mode is set to Dual codec and the image size is set to 640 × 480 (VGA) in MPEG4 setting, the maximum frame rate at which the camera can transmit data will be 20 fps.

•When the camera operation mode is set to Dual codec, the actual values set in MPEG4 setting and JPEG setting may not be obtained, due to the limitation in the capacity to manage two video codecs

simultaneously. Use the following table as a guide for the settings.

Capacity to manage two video codecs simultaneously

JPEG

 

 

MPEG4

 

 

 

 

 

 

 

 

 

SNC-

SNC-

 

SNC-

SNC-

 

RZ50N

RZ50P

 

RZ50N

RZ50P

 

 

 

 

 

 

VGA

15 fps

12 fps

VGA

15 fps

12 fps

 

 

 

 

 

 

VGA

20 fps

16 fps

VGA

10 fps

8 fps

 

 

 

 

 

 

VGA

10 fps

8 fps

QVGA

30 fps

25 fps

 

 

 

 

 

 

VGA

15 fps

12 fps

QVGA

20 fps

16 fps

 

 

 

 

 

 

QVGA

30 fps

25 fps

QVGA

30 fps

25 fps

 

 

 

 

 

 

OK/Cancel

See “Buttons common to every menu” on page 30.

Streaming Tab

Use this tab to set the items for the transmission by unicast or multicast.

Unicast streaming

Specify the transmission port numbers of the MPEG 4 video data and audio data to be used when UDP

(Unicast) is selected with in the main viewer.

Video port number

Specify the transmission port number of the MPEG4 video data. It is initially set to 50000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are actually used for video data communication and control.

Audio port number

Specify the transmission port number of the audio data. It is initially set to 50002. Specify an even number from 1024 to 65534. Two port numbers (the number specified

40 Setting the Camera Image and Audio — Camera Menu