Unattended object setting Tab

Use this tab to set the alarm time for unattended object detection.

Time setting

Unattended object detection requires the following three kinds of time settings.

Detection time

Set the period of time from when an object enters a detection window (active window) and stops until when it is regarded as an unattended object. An alarm will be output if the specified period has elapsed.

You can set the time between 40 seconds and 12 hours.

Note

If Stay time for the tour function specified in the Preset position menu (page 49) is shorter than Detection time, the camera will move to the next preset position before the object is regarded as an unattended object.

Alarm interval

You can repeat the alarm output in an interval of the preset time after an object has been regarded as an unattended object.

If you set Alarm interval to 5 minutes, for example, so that an alarm will be output every 5 minutes repeatedly after an unattended object is detected.

You can set the time between 1 and 6 hours.

Release time

Set the period of time required when the object once regarded as an unattended object is regarded as a background.

An alarm will no longer be output if the specified period has elapsed as the object once regarded as an unattended object is regarded as a background.

You can set the time between 1 and 12 hours.

Note

Set Release time to a larger value than Detection time.

Configuration TabSetting list

Lists the settings for each position: Moving object detection, Unattended object detection, None.

Note

If you select Moving object or Unattended object in the Common tab when no window is set to Active, None is displayed in the list.

Camera the Administrating

Setting the Object Detection Function — Object detection Menu

71