Others
This section explains how to use the application software and commands, including the supplied CD- ROM.
Using the Supplied Setup Program
Explains the functions except those of the Network tab in the IP Setup Program.
To install the Setup Program, to assign an IP address and to set the network, see “Assigning the IP Address to the Camera” on page 9 in “Preparation”.
Notes
•The Setup Program may not operate correctly if you use a personal firewall or antivirus software in your computer. In that case, disable the software or assign an IP address to the camera using another method. For example, see “Assigning the IP Address to the Camera Using ARP Commands” on page 84.
•It you are using Windows XP Service Pack 2, disable the Windows Firewall function. Otherwise the IP Setup Program will not operate correctly.
To disable Windows Firewall, operate as follows:
1 Open Windows Firewall from Control Panel. With the category display, you can find Windows Firewall in Security Center.
2 Select Off, and click OK.
Starting the Setup Program
Select Program from the Start menu of Windows, then select Program, IP Setup Program and IP Setup Program in sequence.
The IP Setup Program starts.
Network tab appears. The IP Setup Program detects cameras connected to the local network and lists them on the Network tab window.
Bandwidth control Tab
You can set the communication bandwidth for the JPEG image.
Note
The bandwidth cannot be controlled for the MPEG4 image.
1 Click the Bandwidth control tab to display the bandwidth setting window.
The current bandwidth is displayed in Current bandwidth.
2 Click to select the camera to set the bandwidth from the list box.
3 Click to select the desired bandwidth from the Setting bandwidth list box.
4 Type the Administrator name and Administrator password in each box.
The factory settings of both items are “admin.”
5 Click OK.
If “Setting OK” is displayed, the bandwidth setting is completed.
Others
Using the Supplied Setup Program | 73 |
|
|