Setting the Camera
Image and Audio
— Camera Menu
When you click Camera in the Administrator menu, the Camera menu appears.
Use this menu to set the functions of the camera. The Camera menu consists of five tabs: Common, Picture, Day/Night, Video codec and Streaming.
Common TabCamera the Administrating
Image modeSelects the mode of the image output from the camera.
Field: Select this option when shooting a moving image.
Frame: Select this option when shooting a still image. With this setting, the vertical resolution increases but the edge of a moving object may be jagged.
Auto: The Frame or Field mode process is automatically performed depending on movement in the image. Frame is performed for an area without movement, and Field is performed for an area with movement.
ColorSelect Color or Monochrome for the image.
E. flipThe image can be displayed upside down. Select Off when you fix the camera to the ceiling. Select On when you install the camera on the rack or the desk.
Zoom modeSelects the zoom mode.
Full: An image can be zoomed up to 26× optical zoom and 12× digital zoom, 312× zoom in total.
Optical: An image can be zoomed up to 26× optical zoom.
Focus modeSelects the focus mode.
Auto: The focus is automatically adjusted.
Manual: The focus can be adjusted by using the NEAR, FAR and ONE PUSH FOCUS buttons of the control panel displayed from the main viewer.
StabilizerSelect the stabilizer to compensate for oscillation. Select On to activate the stabilizer when the camera is affected by oscillation.
Notes
•The view angle of the camera is reduced by approximately 10 % when Stabilizer is set to On.
•The frame rate lowers half when Stabilizer is set to On.
•The stabilizer may not be effective depending on the degree of oscillation.
MicrophoneSelect whether you are going to send the audio from the
mmicrophone input connector. Select On to send the audio from this network camera.
Note
When you change the Microphone setting, click Refresh on the browser to reflect the change when opening the main viewer.
Mic volumeSet the volume level of the audio input from the m microphone input connector. It is adjustable from
Select the bit rate when you send the audio from the m microphone input connector. G.711 (64kbps), G.726 (40kbps), G.726 (32kbps), G.726 (24kbps) or G.726
(16kbps) can be selected.
36 Setting the Camera Image and Audio — Camera Menu