zoom in further using the digital zoom, specify the area again.

•When the specified area is zoomed in, the center may be shifted. In this case, click the point you want to move to the center.

Zooming an image by the camera zoom bar

When you have the authorization to control this function, the zoom bar is displayed below the window. You can specify a location to be zoomed by clicking the zoom bar.

The zoom bar is either displayed or turned off by

clicking below the image frame.

Optical WIDE end icon: Click to move the zoom to optical WIDE end (same magnification).

Optical TELE end icon: Click to move the zoom to optical TELE end (26 × magnification).

Digital TELE end icon: Click to move the zoom to digital TELE end (312 × magnification)

Turning off the zoom bar

When you are not going to use the zoom bar, click under the panorama window to turn off the

panorama window. Click it again to turn off the zoom bar.

Note

The zoom bar of the digital area is not displayed when Zoom mode of the Camera menu is not set to Full.

Moving the camera to a preset position

Select a preset position name from the Preset position drop-down list. The camera will move to the preset position that you have stored in memory using the Preset position menu (page 47).

Camera the Operating

Operating the Camera 23