
Set to send an
Alarm sending
Select On to set sending an
Set whether an image file (JPEG file) is to be attached to the
When On is selected, the image file made using the settings below is attached. When Off is selected, only the message is sent.
Image file nameType the file name you want to assign to the image to be attached to an
Select a suffix to be added to the file name.
None: No suffix is added. The image file name is assigned to the image to be sent via
Date & time: The date & time suffix is added to the image file name.
The date/time suffix consists of lower
Sequence number: A consecutive number of 10 digits between 0000000001 and 4294967295 and two fixed digits 00 are added to the image file name.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the alarm to be linked with
Sensor input 1: The external sensor that is connected to sensor input1 of the camera I/O port.
Sensor input 2: The external sensor that is connected to sensor input 2 of the camera I/O port.
Object detection: The alarm detected by the object detection function.
Click Detection, and the Object detection menu is displayed to allow you to set the object detection function (page 65).
Note
In the case that the synchronized preset position is specified in Position at alarm in the Preset position menu, an alarm event that happens when the camera moves to the preset position will be invalid.
Effective period
Set the period during which the alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period during which the alarm detection is effective.
Click Schedule and the menu for the effective period is displayed. (“Setting the Schedule — Schedule Menu” on page 63)
OK/Cancel
Camera the Administrating
Sending an Image via | 51 |
|
|