Manuals / Brands / Photography / Digital Camera / Sony / Photography / Digital Camera

Sony SNC-RZ50N, SNC-RZ50P Using the SNC audio, upload tool, upload tool — Transmitting Audio to Camera, Installing the SNC audio upload tool, Connecting the Camera to the Computer

1 94

Download 94 pages, 3.78 Mb

Using the SNC audio

upload tool — Transmitting Audio to Camera

The supplied SNC audio upload tool allows you to transmit sound from the computer to the camera. This section explains the setup and operations of the SNC audio upload tool.

The SNC audio upload tool supports the following audio data to be transmitted.

Audio CODEC	Transmission rate

G711 (µ-LAW)	64 kbps

G.726	40 kbps

G.726	32 kbps

G.726	24 kbps

G.726	16 kbps

Note

Only one user can transmit sound to the camera. Meanwhile, another user will not be able to transmit sound to the camera.

Installing the SNC audio upload tool

1 Insert the supplied CD-ROM disc into your computer CD-ROM drive.

After a short time a window will open displaying the files on the CD-ROM.

2 Click the Setup icon of SNC audio upload tool. The “File Download” dialog opens.

3 Click Open.

Note

If you click “Save this program to disk” on the “File Download” dialog, you cannot install the tool correctly. Delete the downloaded file, and click the Setup icon again.

4 Install the SNC audio upload tool following the wizard displayed.

If the Software License Agreement is displayed, read it carefully and accept the agreement to continue with the installation.

Connecting the Camera to the Computer

1 Connect a speaker to the 5 (line output) jack on the camera.

2 Connect a microphone to the microphone input jack on the computer.

Note

If the microphone input jack of the computer is not set correctly, no sound is transmitted from the computer and nothing is output from the speaker connected to the camera.

Set the microphone input jack from the control panel of Windows.

On Windows 2000

1Select Sounds and Multimedia from Control Panel.

2Click Volume in the Sound Recording section on the Audio tab.

The Recording Control window opens

3Check Select in the Microphone section.

On Windows XP

1Select Sounds and Audio Device from Control Panel.

2Click Volume in the Sound Recording section on the Audio tab.

The Recording Control window opens.

3Check Select in the Microphone section.

Others

Using the SNC audio upload tool — Transmitting Audio to Camera 75

Contents

User’s Guide SNC-RZ50N/RZ50P Owner’s Record WARNING AC power adaptor WARNING WARNING (for Installers only) ATTENTION NOTICE TO USERS Table of Contents Setting the Alarm Output — Alarm output Outputting Audio Linked to Alarm Detection Setting the Alarm Buffer — Alarm buffer Setting the Object Detection Function Others Using the SNC panorama creator Overview Features How to Use This User’s Guide Precautions System Requirements Preparation Assigning the IP Address to the Camera Page Accessing the Camera Using the Web Browser When the main viewer of the camera is displayed for the first time To display the welcome page and the main viewer correctly When using antivirus software, etc. on the computer Basic Configuration by the Administrator Operating the Camera Administrator and User Logging in to Homepage — Welcome Page Displaying the Administrator menu directly About viewers ActiveX viewer Configuration of Main Viewer Main menu Setting Home Camera control section Frame rate Monitor image Controlling the Monitor Image Capturing a Monitor Image Operating the Camera Zooming an image by the camera zoom bar Turning off the zoom bar Moving the camera to a preset position Controlling the Camera on a Panorama Image Sending an Image File Recording a Still Image in the Memory Controlling Alarm Output 1 Controlling Day/Night Function Playing the Audio File Stored in the Camera Switching TCP/UDP Transmission Mode Page Administrating the Camera Basic Operations of Administrator Menu Buttons common to every menu General notes on menus Configuration of Administrator menu Page Configuring the System — System Menu PTZ mode OK/Cancel Date & time Tab Current date & time PC clock Date & time format Adjust Initialize Tab Reboot Factory default Backup setting data Restore setting System log Tab Access log Tab Setting the Camera Image and Audio — Camera Menu Audio upload Reset camera menu Picture Tab White balance Exposure mode Brightness Saturation Day/Night Tab Day/Night mode Video codec Tab JPEG setting/MPEG4 setting Streaming Tab Unicast streaming Configuring the Network — Network Menu DNS server HTTP port number Wireless Tab — Setting of wireless connection Type Antenna SSID WEP Dynamic IP address notification Tab — Notifying the IP Address Setting the User — User Menu Setting the Security — Security Menu Saving the Camera Position and Action — Preset position Menu Preset Position at alarm Tour Tab — Setting a tour Tour Resume time on inactivity Tour A to Tour E e-Mail (SMTP) Menu Sending an Image via E- mail Alarm sending Tab — Setting the e- mail sending mode when detecting the alarm File attachment Image file name Suffix Periodical sending Tab — Setting the periodical e-mailsending mode Sending Images to FTP Server — FTP client Menu Periodical sending Tab — Setting the periodical FTP client activity Recording Images in Memory — Image memory Menu Selected root directory Overwrite Capacity warning Alarm recording Periodical recording Tab — Setting the periodical recording mode Folder structure of image memory About the extension of a file Downloading Images from the Camera — FTP server Menu Setting the Alarm Output — Alarm output Menu Outputting Audio Linked to Alarm Detection — Voice alert Menu Setting the Operations from the Viewer — Trigger Menu Alarm output 1 Day/Night Setting the Schedule — Schedule Menu Setting the Alarm Buffer — Alarm buffer Menu Setting the Object Detection Function — Object detection Menu Removed object detection Mode setting section Position setting section Setting items for moving object detection Object size To set the moving object detection function Setting items for unattended object detection To set the unattended object detection function Unattended object setting Tab Time setting Configuration Tab Setting list Transmitting with External Equipment Using the External Serial Terminal Others Using the Supplied Setup Program Date time Tab Rebooting the Camera Using the SNC audio upload tool — Transmitting Audio to Camera upload tool Using the SNC audio upload tool Audio upload tab Voice alert tab Uploading the recorded audio file to the camera Saving the recorded audio file to the computer Uploading the saved audio file to the camera Setting tab Using the SNC video player — Playing Video/ Audio File Recorded with Camera player Using the SNC video player Playing a video/audio file Playing from a specified point Adjusting the sound Saving an image Using the SNC panorama creator — Creating a Panorama Image Preparing connection to the camera Creating and transmitting a panorama image Saving a custom image to the camera Using the Custom Homepage Installer Page Assigning the IP Address to the Camera Using ARP Commands Using the SNMP Page Specifications When You Discard the Camera Glossary MPEG4 Multicast Network address Network bandwidth NTP server Index