Select the image you have prepared.

The camera does not support use of images that do not conform to the above conditions.

1 Click File open on the Main tab. The File dialog opens.

2

3 Select the view angle of the image to be created in Angle setting.

To limit the pan/tilt range of the camera to the selected view angle, check the Lock check box.

4 Click Send to transmit the prepared image to the camera.

The image is saved in the camera.

You can use the saved image when you control panning and tilting from the main viewer.

Tip

The panorama image is the still image converted from the image taken when you were going to create a panorama image with “SNC panorama creator”. When the camera is moved or when the layout around the camera is changed, create the panorama image again.

Others

Using the Custom Homepage Installer

The supplied Custom Homepage Installer allows you to store the homepage that you have created in the camera and watch it.

Notes on creating the homepage

When you are creating the homepage, note the following points.

•The file name should be typed using up to 24 characters including the extension.

•The file size of the homepage should be 2.4 MB or less.

•To see the created homepage, set the Homepage in the System menu.

Uploading the homepage to the camera using the Custom Homepage Installer

1 Insert the supplied CD-ROM disc into your computer CD-ROM drive.

After a short time a window will open displaying the files on the CD-ROM.

2 Click the Setup icon of Custom Homepage Installer.

The “File Download” dialog opens.

3 Click Open.

The installer starts and notes are displayed.

82 Using the Custom Homepage Installer