Mode setting section

Position setting section

Moving object detection setting section

Unattended object detection setting section

Mode setting section

PTZ position

Select whether object detection is performed under the individual conditions for each preset position or always under the same conditions.

Current position: Regardless of the camera position, object detection always works under the same conditions.

Preset position: You can set object detection for each preset position. When Preset position is selected, an object will not be detected if the camera is not directed to the preset position.

Note

You cannot select Preset position if no preset position is stored in the Position tab of the Preset position menu.

Position setting section

Position

Select the preset position you want to set from the drop- down list. The camera automatically moves to the selected preset position.

Note

This item is disabled when PTZ position is set to Current position.

Detection

Select either moving object detection or unattended object detection for the selected position.

Moving object: Select when you want to perform moving object detection. When this option is selected, the moving object setting menu appears.

See “Setting items for moving object detection” on page 67.

Unattended object: Select when you want to perform unattended object detection. When this option is selected, the unattended object setting menu appears. See “Setting items for unattended object detection” on page 69.

Setting items for moving object detection

The following setting items appear when Detection is set to Moving object.

Monitor display

Set the active/inactive window while monitoring a moving image.

Active or inactive window

Note

The image displayed on the monitor display has low resolution.

Window1 to Window4 check boxes

When you check a check box, the corresponding window (active or inactive window) appears on the monitor display. You can change the position and size of the window.

Active: To use the window as an active area in which moving object detection is performed.

Inactive: To use the window as an inactive area in which any moving object is ignored. Select Inactive to set an inactive area inside an active window.

Note

You cannot set all four windows as Inactive windows. Be sure to set one or more windows as Active window(s).

Camera the Administrating

Setting the Object Detection Function — Object detection Menu

67