Camera the Administrating

Default gateway

Type the default gateway.

DNS server

Configure the DNS server address.

Obtain DNS server address automatically: Select this option to obtain the IP address of DNS server automatically. It can be set only when Obtain an IP address automatically (DHCP) is selected.

Use the following DNS server address: Select this when you set a fixed address as the IP address of the DNS server. With this setting, specify the addresses on Primary DNS server and Secondary DNS server manually.

Note

When you select Obtain DNS server address automatically, make sure that a DHCP server is operating on the network.

Primary DNS server

Type the IP address of the primary DNS server.

Secondary DNS server

Type the IP address of the secondary DNS server, if necessary.

HTTP port number

Normally select 80. If you want to use a port number other than 80, select the text box and type a port number between 1024 and 65535.

Note

When you have set the HTTP port number to a number other than 80 in the Network menu or in the Setup Program, access the camera by typing the IP address of the camera on your web browser as follows:

Example: when the HTTP port number is set to 8000

Wireless Tab — Setting of wireless connection

Insert the specified wireless card into the CF card slot or PC card slot of the camera, and set the items for connecting to the wireless network.

Before setting, read the operation manual and installation manual supplied with the wireless card together with this guide.

When you use the CF card slot, insert the Sony wireless card SNCA-CFW1 (optional) in it. When you use the PC card slot, use with the Compact Flash Type II-PCMCIA converting adaptor which is commercially available.

Verified wireless cards

Sony Wireless Card SNCA-CFW1 (not supplied) with a commercially available CompactFlash type II-PCMCIA adaptor

Notes

•Before removing the wireless card from the camera, turn off the power of the camera.

•The throughput of the data transmission/reception via the network cable may decrease when the wireless card is in use.

•If two wireless cards are inserted, the second card is invalid. Also, if the camera is turned on with two cards inserted, only the wireless card inserted in the CF card slot is valid.

OK/Cancel

See “Buttons common to every menu” on page 30.

MAC address

Displays the MAC address of the wireless card inserted to the CF card slot or PC card slot.

If a wireless card is not inserted, “00:00:00:00:00:00” is displayed.

42 Configuring the Network — Network Menu