Appendix
Item number | Item | Setting | Function |
129 | STOP CODE |
| Stop code detection mode and adjustment of stop position |
| FUNCTION |
| when a stop code is detected. |
|
|
|
|
| Sub items |
|
|
|
|
|
|
| DETECT BEEP | on | on: When a stop code is detected, sound a beeper. |
|
| [off] | off: When a stop code is detected, do not sound a beeper. |
|
|
|
|
| DETECT STOP | on | on: When a stop code is detected, stop the tape. (“D- |
|
| [off] | STOP” appears in the information display.) |
|
|
| off: When a stop code is detected, do not stop the tape. |
|
|
|
|
| STOP ADJUST | 150 fr | When a stop code is detected, adjust the tape stop position |
|
| [0 fr] | from the normal stop position in the direction of the SOM |
|
|
| point (program start point), in the range 0 to 150 frames. |
|
|
|
|
| REC ADJUST | 5sec | Specifies how many seconds before the SOM point to start |
|
| 4sec | recording a stop code. |
|
| [3sec] |
|
|
| 2sec |
|
|
| 1sec |
|
|
|
|
|
130 | 16 to [11] to 0 | Adjusts the information display luminance. | |
|
|
|
|
131 | CHANGED MENU |
| Changes the display color of items whose setting has been |
| HIGHLIGHT |
| changed. |
|
|
|
|
| Sub items |
|
|
|
|
|
|
| ITEM SETTING | [off] | off: Changed menu setting values do not change display |
|
| on | color. |
|
|
| on: Changed menu setting values are displayed in yellow. |
|
|
|
|
| DEFAULT | [off] | off: Menu numbers with changed DEFAULT values do not |
| SETTING | on | change display color. |
|
|
| on: Menu numbers with changed DEFAULT values are |
|
|
| displayed in yellow. |
|
|
|
|
132 | KNOB MODE | [set default] | Selects the behavior of the unit when the MULTI CONTROL |
|
| move window | knob is pressed during VTR SETUP menu operations. |
|
|
| set default: When a setting value is being selected, selects |
|
|
| the default value. |
|
|
| move window: Move between the item window and the |
|
|
| window for changing values. |
|
|
|
|
Items Relating to Remote Interface (Nos. 201 to ...)
Item number | Item | Setting |
| Function | |
201 | REMOTE | [off] |
| When this is set to “on”, this unit is controlled from the | |
|
| on |
| device connected to the REMOTE | |
|
|
|
| I/O(9P) connectors. | |
|
|
|
|
|
|
|
|
|
| Note | |
|
|
|
| When | this unit is controlled by a device connected to the |
|
|
|
| REMOTE | |
|
|
|
| connector, the editing control buttons and all of the tape | |
|
|
|
| transport buttons except STOP and EJECT are disabled. It | |
|
|
|
| is also possible to make a setting so that all of the buttons | |
|
|
|
| are disabled. | |
|
|
|
| For details, see item 008. | |
|
|
|
|
| |
202 | REMOTE | [off] |
| When this is set to “on”, this unit is controlled from the | |
|
| on |
| device connected to the REMOTE 2 PARALLEL I/O(50P) | |
|
|
|
| connector. | |
|
|
|
|
|
|
148 Menu List