Symbol | Meaning |
UBR. | VITC reader user bit data |
|
|
TCG | Time code data from the time code |
| generator |
|
|
UBG | User bit data from the time code generator |
|
|
DUR | The duration between any two of the four |
| edit points (IN, OUT, AUDIO IN, and AUDIO |
| OUT) |
|
|
Note
When time data or user bits are not read correctly, a “*” will be displayed in this block so that the symbols become “T*R”, “U*R”, “T*R.”, “U*R.”, etc.
bDrop frame mark of the time code reader “ • ”: drop frame mode
“ : ”:
cDrop frame mark of the time code generator “ • ”: drop frame mode
“ : ”:
dField mark of the VITC data “ ”: (blank space) fields 1 and 3 “ * ”: fields 2 and 4
eOperation mode
The contents are divided into blocks A and B as shown below.
Block A: Indicates the operation mode.
Block B: Indicates the tape speed or servo lock status.
Block C: A x mark here indicates an edit section for automatic editing.
AB C
Settings Menu 4 Chapter