5-3 Preparing for Playback

5-3-1 Setting Switches and Menus

Before starting playback, set the switches and menus as shown in the diagram below.

For details, see the pages indicated in the parentheses.

REMOTE buttons: None of

MONITOR SELECT buttons: Audio

these buttons light up.

channels to be monitored (page 103)

 

SRW-5000

 

HD DIGITALVIDEO CASSETTE RECORDER

POWER switch: ON

PB level controls:

Playback level

Menu settings

[F1] (TIMER SEL) button in the TC menu: Select the time data to be displayed.

Recording/Playback 5 Chapter

5-3-2 Adjusting the Audio Playback Level

1 Press the PB LEVEL button at the upper left of the control panel to enter the PB LEVEL adjustment mode.

A vertical blue line appears at the right of the audio level meter for each channel, indicating the PB LEVEL adjustment mode.

2 Press the button for the channel for which you want to carry out the adjustment (common with MONITOR R), to make the channel active.

An orange border appears around the audio level meter, indicating that it is active.

3 Make the adjustment, using the MULTI CONTROL knob or cursor buttons.

To escape from the PB LEVEL adjustment mode Press the PB LEVEL button at the upper left of the control panel once more. The vertical blue line at the right of the audio level meter for each channel disappears or turns white.

To output at the preset level (for a level recorded at reference 0 dB, outputting at +4 dBm)

In the PB LEVEL adjustment mode, make the channel active, then press the MULTI CONTROL knob. The setting becomes the preset value. Press once more to return to the immediately previous value. Pressing once more again to return to the preset value. You can also return to the preset value with the cursor center button. When you exit the PB LEVEL adjustment mode, a vertical white line on the right of the audio level meter is not displayed.

For details on changing the factory-set reference output level, refer to the Installation Manual.

5-3 Preparing for Playback 107