ALT/[F8] button BLK LV (ALL): Pressing this button makes it active, and the cursor R and r buttons increase or decrease the value by 1. You can also change the setting with the MULTI CONTROL knob.

ALT/[F9] button SETUP (CST): Pressing this button makes it active, and the cursor R and r buttons increase or decrease the value by 0.1. You can also change the setting with the MULTI CONTROL knob.

Adjusting the master output level (HD)

Make this adjustment with the [F4] (MASTER LEVEL) button.

prst: 100% (4000H)

Numerical value: 0.0 (0H) to 141.3% (5A70H)

Adjustable range: –∞to +3 dB

This setting can also be carried out in the VTR SETUP menu item 708 “MASTER LEVEL (HD)”.

Adjusting the Y output level (HD)

Make this adjustment with the [F5] (Y (HD)) button. prst: 100% (4000H)

Numerical value: 0.0 (0H) to 141.3% (5A70H)

Adjustable range: –∞to +3 dB

This setting can also be carried out in the VTR SETUP menu item 709 “Y LEVEL (HD)”.

Adjusting the PB output level (HD)

Make this adjustment with the [F6] (PB (HD)) button. prst: 100% (4000H)

Numerical value: 0.0 (0H) to 141.3% (5A70H)

Adjustable range: –∞to +3 dB

This setting can also be carried out in the VTR SETUP menu item 710 “PB LEVEL (HD)”.

Adjusting the PR output level (HD)

Make this adjustment with the [F7] (PR LEVEL) button. prst: 100% (4000H)

Numerical value: 0.0 (0H) to 141.3% (5A70H)

Adjustable range: –∞to +3 dB

This setting can also be carried out in the VTR SETUP menu item 711 “PR LEVEL (HD)”.

Adjusting the setup level (HD)

Make this adjustment with the [F8] (SETUP LEVEL) button.

prst: 0% (0)

Numerical value: –10.0 to +10.0

Adjustable range: –10 to +10%

This setting can also be carried out in the VTR SETUP menu item 712 “SETUP LEVEL (HD)”.

Adjusting the sync phase (HD)

Use this setting to precisely match the output phase of the VTR to the reference signal or when using a switcher or other device connected to another VTR to create special effects such as fading, wrapping, and dissolving.

To adjust the output signal sync phase with respect to the reference input, make this adjustment with the [F9] (SYNC PHASE) button.

prst: 0 (0)

Numerical value: –128 to +127

Adjustable range: –1.4 to +1.4H

This setting can also be carried out in the VTR SETUP menu item 713 “SYNC PHASE (HD)”.

Fine adjustment of the sync phase (HD)

Make this adjustment with the [F10] (FINE) button. prst: 0 (0)

Numerical value: 0 to 1024

Adjustable range: 0 to 323 nsec

This setting can also be carried out in the VTR SETUP menu item 714 “FINE (HD)”.

Adjusting the master output level (D1)

Make this adjustment with the ALT/[F1] (MASTER LEVEL) buttons.

prst: 100% (4000H)

Numerical value: 0.0 (0H) to 141.3%

Adjustable range: –∞to +3 dB

This setting can also be carried out in the VTR SETUP menu item 755 “MASTER LEVEL (D1)”.

Adjusting the Y output level (D1)

Make this adjustment with the ALT/[F2] (Y LEVEL) buttons.

prst: 100% (4000H)

Numerical value: 0.0 (0H) to 141.3% (5A70H)

Adjustable range: –∞to +3 dB

This setting can also be carried out in the VTR SETUP menu item 756 “Y LEVEL (D1)”.

Adjusting the R–Y output level (D1)

Make this adjustment with the ALT/[F4] (R–Y LEVEL) buttons.

prst: 100% (4000H)

Numerical value: 0.0 (0H) to 141.3% (5A70H)

Adjustable range: –∞to +3 dB

This setting can also be carried out in the VTR SETUP menu item 758 “R-Y LEVEL (D1)”.

Adjusting the video gain output level (HD/ SD)

Make this adjustment with the ALT/[F5] (V GAIN (ALL)) buttons.

Settings Menu 4 Chapter

4-5 VIDEO Menu 89