6-3 Manual Editing
Follow the procedure below to perform manual editing.
2 1
3 | 7 4 5,6 |
1 Enter jog or shuttle mode to position the tape at a place at least three seconds before the position at which you want to set an edit point.
2
3 Press the [F3] (ASSEMBLE) button in the HOME menu or press the respective INSERT button ([F4] (INS TC), [F5] (INS VIDEO) or [F6] (INS AUDIO) button) to select the edit mode that you want.
4 Press the PLAY button.
Playback starts.
5 Press the REC/EDIT button at the point where you want to start editing (IN point).
The REC/EDIT button lights, and editing starts.
6 Press the REC/EDIT button at the point where you want to end editing (OUT point).
Editing ends, but the tape continues to run in playback mode.
7 Press the STOP button to stop the tape.
Note
To ensure a stable picture, start playback at least three seconds before the IN point.
Editing 6 Chapter