Settings Menu 4 Chapter
2 Press the ALT/[F8] (STOP CODE) button.
The STOP CODE menu screen appears.
3 Press the [F4] (DETECT ADJUST) button. The setting display lights up.
4 Change the setting with the cursor R or r button.
You may also use the MULTI CONTROL knob.
5 Press the [F4] (DETECT ADJUST) button.
The data entry window disappears.
Recording stop codes: [F7]
To record stop codes, press the [F7] (CODE REC) button. In PLAY, JOG, or similar mode, cue up to the SOM point, and press the REC/EDIT button. With the point at which the REC/EDIT button is pressed as the SOM point, after a preroll, the recording operation starts, and as shown in the figure below, user bits (value 0) and stop code are recorded, after which the unit automatically stops. After recording is completed, the setting of the [F7] (CODE REC) button is automatically changed to OFF.
Section to insert time code
Tape
| UB “0” |
|
| STOP CODE |
| UB “0” |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 frames |
|
| 20 frames |
| 3 frames |
|
| |||||
|
|
|
| ||||||||||
3 1
2 4
1 Press the HOME button.
The HOME menu screen appears.
2 Press the ALT/[F8] (STOP CODE) buttons.
The STOP CODE menu screen appears.
3 Press the [F7] (CODE REC) button to select “on”.
Pressing the button toggles betwen “on” and “off”.
4 Press the REC/EDIT button.
To abandon the operation at any point Press the STOP button.
To specify the recording start position
Press the [F5] (REC ADJUST) button, to specify how many seconds before the SOM point the recording of the stop code should start.
To check the recording
Press the PREVIEW/REVIEW button. The tape prerolls to the SOM point and playback starts. If the stop code is correctly recorded, regardless of the settings of the [F2] (DETECT BEEP) button and [F3] (DETECT STOP) button, a confirmation sound is emitted for 1 second, and the unit stops in accordance with the setting of the [F4] (DETECT ADJUST) button. If the unit does not stop even after passing the point at which the stop code is recorded, repeat the recording operation.
Note
Checking the recording with the PREVIEW/REVIEW button is only valid in the stop code menu screen.
Deleting stop codes: [F8]
To delete a stop code, press the [F8] (CODE ERASE) button. In stop code detection mode, stop the VTR at the stop code you want to delete, and press the REC/EDIT button. After prerolling 5 seconds before the stop code recording point, the VTR begins the delete operation, and as shown in the figure below, user bits (value 0) are recorded, after which the unit automatically stops. After deletion is completed, the setting of the [F8] (CODE ERASE) button is automatically changed to OFF.
54