To adjust the audio playback level manually
In the PB LEVEL adjustment mode, make the channel active, then adjust to the desired volume with the MULTI CONTROL knob or cursor R and r buttons. When you exit the PB LEVEL adjustment mode, the vertical white line on the right of the audio level meter and a horizontal white line indicating the setting are displayed, indicating that the playback level is subject to manual adjustment.
PB LEVEL adjustment
|
| You can also carry out the playing level adjustment using | |
| |||
|
| the VTR SETUP menu item 833 “AUDIO PB LEVEL”. | |
|
| ||
| |||
| |||
| |||
|
|
|
|
|
|
|
|
|
|
|
|
Chapter |
|
|
|
|
| ||
5 |
| Conversion Mode |
|
Recording/Playback |
|
| |
| Select the conversion mode using the VTR SETUP menu | ||
|
| ||
|
| item 930 “DOWNCONVERTER MODE”. | |
|
| • Edge crop mode (CROP) |
|
|
|
|
|
|
| HD | SD |
n ,
1/4 of the HDVS image on each side is cut off.
Horizontal adjustment of the edge cropping Use the VTR SETUP menu item 932 “H CROP POSITION (DC)”.
• Letter box mode (LETTER BOX)
When the letter box mode is selected, you can select one of the following three conversion methods using the VTR SETUP menu item 931 “LETTER BOX MODE (DC)”.
When 16:9 is selected
HD | SD |
,
The signal is compressed, maintaining an aspect ratio of 16:9.
When 14:9 is selected
HD | SD |
,
The sides of the HDVS image are cut and the signal is compressed, changing the aspect ratio to 14:9.
When 13:9 is selected
HD | SD |
,
The sides of the HDVS image are cut and the signal is compressed, changing the aspect ratio to 13:9.
• Squeeze mode (SQUEEZE)
HD | SD |
,
The 16:9 signal is compressed, changing the aspect ratio to 13:9.
108