Settings Menu 4 Chapter

6 To continue with changing the settings, repeat steps 1 to 5.

7 Press the [F10] (SAVE/EXIT) button.

This saves all the changes, and returns to the SET UP menu screen.

To check the items with changed settings

In VTR SETUP menu item 131 “CHANGED MENU HIGHLIGHT”, set ITEM SETTING to “on”.

Items for which the setting values are different from the DEFAULT values appear in the VTR SETUP screen in yellow.

To change the DEFAULT values in a menu item

1 Use the cursor t button to make the item window active, then with the cursor R and r buttons or the MULTI CONTROL knob, move the cursor to the item to be changed.

2 Press the [F7] (CHANGE DATA) button or the cursor

tbutton.

This opens a window for changing the setting.

For a sub item, further press the [F7] (CHANGE DATA) button or the cursor t button, to open the window for changing the setting.

3 With the [F7] (CHANGE DATA) button, the cursor R or r button, or the MULTI CONTROL knob, change the setting.

4 Holding down the SET and ENTRY buttons at the same time, press the center cursor button.

This saves the current settings as new DEFAULT values for CURRENT DEFAULT.

The asterisks “*” indicating the DEFAULT values move.

Note

If you press the center cursor button first, the setting values return to the PRESET values before CURRENT DEFAULT is overwritten, and it is not possible to change DEFAULT correctly.

To return the DEFAULT values to the factory default PRESET values

Holding down the CLR and ENTRY buttons at the same time, press the center cursor button.

This saves the factory default PRESET values as the DEFAULT values for CURRENT DEFAULT.

5 Reset the current setting values if necessary, then press the [F10] (SAVE/EXIT) button.

You can save the changed CURRENT DEFAULT data set in DEFAULT VTR BANK or a “Memory Stick”.

For details, see see “4-1-10 Saving and Recalling DEFAULT Settings on a Bank” on page 48 and see “4-1- 11 Saving and Recalling DEFAULT Settings in a “Memory Stick”” on page 48.

To check the items for which DEFAULT values have been changed

In VTR SETUP menu item 131 “CHANGED MENU HIGHLIGHT”, set DEFAULT SETTING to “on”. Items for which the DEFAULT values are different from the factory setting values (FACTORY PRESET) values have the item number (or item name for a subitem) in the VTR SETUP screen shown in yellow.

4-7-2 PANEL SETUP Menu

The PANEL SETUP menu is used to set the operation

To activate the PANEL SETUP menu

conditions of the upper and lower control panels.

Press the SET UP button, then press the [F5] (PANEL

 

SETUP) button.

K E Y I N H

PLAY LOCK

o f f

 

K E Y

A L A R M

S C R E E N

S C R E E N

E X I T

 

B E E P

B E E P

S A V E R

S A V E R S

 

 

o f f

h i g h

1 0 m i n

 

 

 

 

 

 

 

 

 

100 4-7 SET UP Menu