To start the procedure over again
Press the [F9] (CANCEL) button to start again.
To change a character
Press the cursor R button to move the cursor to the comment to be changed. Then press the cursor T or
tbutton to move the insertion position.
If the entered text is longer than the comment box
tor T appears to the left or right of the box.
6 Press the [F10] (SAVE/EXIT) button.
The screen that was on before the comment data was changed is displayed again.
Prerolling to a cue point
1 Press the [F1] (CUE SCAN) button repeatedly to specify the direction in which the cursor moves when the PREROLL button is pressed.
Each press of the button changes the direction as follows: FWD (forward) t REW (reverse) t unspecified.
FWD: Pressing the PREROLL button causes the cursor to move to the next line, and the VTR to preroll to the time code on that line. Invalid time codes are ignored.
REW: Pressing the PREROLL button causes the cursor to move to the previous line, and the VTR to preroll to the time code on that line. Invalid time codes are ignored.
2 Press the PREROLL button.
Press the cursor buttons to move the cursor to the line that is to be
C U E | REC | DATE[2003/02/25] | EOS[01:01:24:15] | ||||||||||
S C A N | TITLE[ |
|
|
|
|
|
|
| ] | Rast100% | |||
|
|
|
|
|
|
|
| ||||||
| No. |
| Time |
|
| Mrk | Tk | Cut | Scn | ||||
E N T R Y |
|
|
|
|
|
|
|
|
|
|
|
|
|
P O I N T | 0 | 0 0 : 0 1 : 0 2 : 0 3 |
| N G | 0 0 : 0 1 : 0 1 : 0 3 |
| |||||||
|
| 1 | - |
| K P | - |
| ||||||
| 2 | 0 0 : 0 3 : 0 4 : 0 3 |
| O K @ 0 0 : 0 3 : 0 3 : 0 3 | |||||||||
C O M M N T |
| ||||||||||||
3 | 0 0 : 0 4 : 0 4 : 0 3 |
| O K | 0 0 : 0 4 : 0 3 : 0 3 |
| ||||||||
E D I T |
|
| |||||||||||
4 | 0 0 : 0 5 : 0 5 : 0 3 |
| N G | 0 0 : 0 5 : 0 4 : 0 3 |
| ||||||||
|
|
| |||||||||||
| 5 | 0 0 : 0 6 : 0 6 : 0 3 |
| O K | 0 0 : 0 6 : 0 5 : 0 3 |
| |||||||
C H A N G E | 6 | - |
|
|
|
|
|
|
| ||||
D A T A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D E L | M A R K |
| P R O - | T A P E | C U E N U M | W R I T E / |
| ||||||
P O I N T |
|
|
|
| T E C T | I N F O |
| P O I N T | E X I T |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To cancel a
Press the [F7] (PROTECT) button. A message appears (in the control panel display) requesting confirmation of cancellation operation.
Press the [F7] (PROTECT) button while holding down the SFT button.
Inserting a new line
1 Use the cursor buttons to move the cursor to the line that will be under the new line to be inserted.
To move the cursor using the numeric buttons
Enter the line number using the numeric buttons. Then press the [F9] (CUENUM POINT) button. The cursor will move to the line specified by the numeric buttons.
Note
If the movement of the cursor (B) is not linked with the cursor buttons, the cursor (B) will not move when the cursor buttons are pressed.
To link the cursor (B) with the cursor buttons Press the cursor center button. Each press of the button alternately links and unlinks the cursor (B).
2 Press the ENTRY button while holding down the SFT button.
A new line is inserted above the line where the cursor (B) is located, and the current time data is entered on the new line.
Moving a line
Press the cursor buttons to move the cursor to the Time data of the line to be moved. Then press the + or – button. Each press of the + button moves the line up, while each press of the – button moves the line down.
Note
If you perform the procedure above while the cursor is on any other data other than the Time data, only the contents selected by the cursor will be moved. To move the entire line, be sure that the cursor is placed on the Time data.
Deleting a line
Press the cursor button to move the cursor to the line to be deleted, and then press the [F5] (DEL POINT) button while pressing down the SFT button. The line is deleted and all the line numbers below are decreased by one.
Displaying other information saved to the
Press the [F8] (TAPE INFO) button. The TAPE INFORMATION window appears, showing other information.
Settings Menu 4 Chapter