Item number | Item | Setting | Function |
605 | TAPE TIMER | +/– 12H | Selects whether the CTL counter operates in |
| DISPLAY | [24H] | display mode or |
|
|
| |
|
|
| 24H: |
|
|
| Note |
|
|
|
| In the | |
|
|
| dropped. | |
|
|
|
| |
606 | TCG MODE select | [preset] | Selects the time code to which the internal time code | |
|
| regene | generator synchronizes. | |
|
| auto | preset: By an operation on the front panel or by remote | |
|
|
| control from a device connected to the REMOTE 1- | |
|
|
| IN(9P) connector, the initial value of the time code | |
|
|
| generated by the internal time code generator can be | |
|
|
| preset. | |
|
|
| regene: The internal time code generator is synchronized | |
|
|
| (“regene”) to the time code values read by the internal | |
|
|
| time code generator. | |
|
|
| auto: Operates in regene mode when either assemble or | |
|
|
| insert mode is selected and operates in preset mode | |
|
|
| when any other mode is selected. | |
|
|
|
| |
607 | TCG REGENE | If item 606 is set to “regene”, this selects the source of the | ||
| SOURCE select | synchronization of the time code generated internally. | ||
|
| |||
|
| code track on the tape is used. | ||
|
| |||
|
|
| data” in the video signal on the tape is used. | |
|
|
| ||
|
|
| CODE IN connector is used. | |
|
|
| ||
|
|
| connector is used. | |
|
|
| ||
|
|
| connector is used. | |
|
|
|
| |
608 | TCG/UBG REGENE | [TC&UB] | Selects the regenerate signal when the time code | |
| MODE | TC | generator is in regenerate mode (when item 606 is set to | |
|
| UB | “regene”) or during auto edit mode. | |
|
|
| TC & UB: The time code signal and user bits signal are | |
|
|
| both regenerated. | |
|
|
| TC: The time code signal is regenerated. | |
|
|
| UB: The user bits signal is regenerated. | |
|
|
|
| |
609 | REC RUN/FREE | [free run] | This selects the way in which the time code advances. | |
| RUN select | rec run | free run: Regardless of the operation mode of this unit, the | |
|
|
| time code advances all the time that the power is on. | |
|
|
| rec run: The time code advances only during recording. |
|
|
| Note |
|
|
|
| When | using this setting, set item 606 to “preset”. |
|
|
|
| |
610 | DOWNCONVERTER | [on] | Selects whether or not to insert VITC data in the | |
| VICT output | off | converter output. | |
|
|
| on: VITC data is inserted. | |
|
|
| off: VITC data is not inserted. | |
|
|
|
| |
611 | VITC | 12,281 line | When 29.97PsF/59.94i mode is selected on the VTR, this | |
| select (NTSC) |
| setting specifies the lines in which the VITC signal is | |
|
| [16,279 line] | inserted. | |
|
|
| It can be inserted in any lines from 12,281 to 20,283. | |
|
| 20,283 line |
|
|
|
|
| Note |
|
|
|
| Items | 611 and 612 allow VITC to be inserted in two lines. |
Appendix
Menu List 155