Positioning the Projector and a Screen

The installation distance between the projector and a screen varies depending on the size of the screen.

1 Determine the installation position of the projector and screen.

Side view

Screen

Distance between the screen and the center of the lens

*Adjuster not stretched, and the V Keystone function has been done.

When “Wide Mode” in the INPUT SETTING menu is set to “Full 2”

Unit: m (feet)

Projected image size

40

80

100

150

200

250

300

(diagonal) (inches)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Minimum Distance

1.2

2.5

3.1

4.6

6.2

7.7

9.3

 

(3.9)

(8.2)

(10.2)

(15.1)

(20.3)

(25.3)

(30.5)

 

 

 

 

 

 

 

 

Maximum Distance

1.5

2.9

3.7

5.6

7.4

9.3

11.1

 

(4.9)

(9.5)

(12.1)

(18.4)

(24.3)

(30.5)

(36.4)

 

 

 

 

 

 

 

 

There may be a slight difference between the actual value and the design value shown in the table above.

Notes on Wide Mode settings

•When “Wide Mode” in the INPUT SETTING menu is set to the mode other than “Full 2”, black bands may appear at the top and bottom or right and left of the screen.

•When “Wide Mode” in the INPUT SETTING menu is set to “4:3”, the projected image size (diagonal) will be approximately 88 % of “Full 2” size.

•When “Wide Mode” in the INPUT SETTING menu is set to “16:9”, the projected image size (diagonal) will be approximately 97 % of “Full 2” size.

For details on installation, see “Installation Diagram” on page 56.

16