Sony VPL-BW5 PICTURE SETTING Menu

PICTURE SETTING Menu

The PICTURE SETTING menu is used for adjusting the picture.

PICTURE SETTING	Input A	PICTURE SETTING	Input-A
Picture Mode	Standard	ADJUST PICTURE	Standard
		Contrast:	80
Adjust Picture ...
		Brightness:	50
		Gamma Mode:	Off
		Color Temp.:	High

Setting items		Functions	Initial setting
Picture Mode		You can select the picture viewing mode that best	Set according to
		suits the type of picture or the environment.	the input signal
		Dynamic: Select this for bright picture suitable for
		viewing it in a bright room.
		Standard: Select this for more natural picture than
		the picture with the Dynamic setting.
		Cinema: Select this for watching movies, etc. in a
		dark environment.
		User 1, User 2, User 3: You can adjust the quality of
		the picture to suit your taste and then store the
		settings. Once the settings are stored, you can view
		the picture with the adjusted picture quality by
		pressing PICTURE MODE on the remote control.
		To store the settings
		1 Select User 1, User 2, or User 3.
		2 Adjust the items you want in the menus.
		Tips
		• You can also adjust the picture quality in
		“Dynamic”, “Standard” or “Cinema”, and store the
		settings. To reset everything to the factory settings,
		select “Picture Mode,” and press RESET on the
		remote control.
		• Some items may not be displayed in the PICTURE
		SETTING menu, depending on the type of input
		signal. For details, see “Input Signals and
		Adjustable/Setting Items” (1 page 45).
Adjust Picture...		The projector can store the setting values of the following menu items for
		each picture mode separately.
	Contrast	Adjusts the white area of pictures (white level).	80
		The higher the setting, the greater the contrast. The
		lower the setting, the lower the contrast.
		You can make adjustments by pressing
		CONTRAST+/– on the remote control.

Menus the Using

35