aVentilation holes (exhaust)bLens

Remove the lens cover before projection.

cFront remote control detectord?/1 (On/standby) switch

Turns on the projector when the projector is in standby mode. To turn off the power, press the ?/1 switch twice according to the message or hold the ?/1 switch for about one second.

The ?/1 (On/standby) indicator lights up or flashes under the following conditions:

–Lights in red when the AC power cord is plugged into a wall outlet. Once the projector is in standby mode, you can turn it on with the ?/1 switch.

–Flashes in red when the temperature becomes high inside the projector, or when the projector fails to operate.

–Lights in green when the power is turned on, and when it is ready to operate.

–Flashes in green until the projector is ready to operate after the projector is turned on. Also, flashes in green while the cooling fan is running after the power is turned off with the ?/1 switch. The fan runs for about 90 seconds after the power is turned off. (1 page 27)

–Lights in orange when the power saving mode is on.

eINPUT button

Selects an input signal. The input signal will change whenever you press the button.

fM/m/</, (arrow) / (enter) buttons

Used to enter the settings of items in the menu system, select a menu, or make various adjustments.

gLAMP/COVER indicators

Flashes in orange under the following conditions:

•A reception rate of 2 flashes when the lamp cover or air filter cover is not secured firmly.

•A reception rate of 3 flashes when the lamp has reached the end of its life or reaches a high temperature.

hMENU button

Displays the on-screen menu. Press again to clear the menu.

iPIC MUTING button

Cuts off the picture. Press again to restore the picture.

q; Zoom ring

Adjusts the picture size.

qa Focus ring

Adjusts the picture focus.

Controls of Location

7