Indicators
Symptom | Cause and Remedy |
|
|
The LAMP/COVER | • The lamp cover or the air filter cover is detached. |
indicator flashes in | |
orange. (Repetition rate |
|
of 2 flashes) |
|
|
|
The LAMP/COVER | • The lamp has reached the end of its life. |
indicator flashes in | |
orange. (Repetition rate | • The lamp has reached a high temperature. |
of 3 flashes) | c Wait for 60 seconds until the lamp cools, then turn on the |
| power again. |
|
|
:/1 switch flashes in | • The internal temperature is unusually high. |
red. (Repetition rate of 2 | c Check to ensure that nothing is blocking the ventilation holes. |
flashes) | • The projector is being used at a high altitude. |
| c Ensure that “High Altitude Mode” in the INSTALL SETTING |
| menu is set to “On.” |
|
|
:/1 switch flashes in | The fan is broken. |
red. (Repetition rate of 4 | c Consult with qualified Sony personnel. |
flashes) |
|
|
|
:/1 switch flashes in | Unplug the AC power cord from the wall outlet after the :/1 |
red. (Repetition rate of 6 | switch stops flashing, plug the power cord to the wall outlet, then |
flashes) | turn the projector on again. If the :/1 switch flashes in red and the |
| problem persists, the electrical system has failed. |
| c Consult with qualified Sony personnel. |
|
|
Message Lists
Warning Message
Message | Meaning and Remedy |
|
|
Please replace the Lamp | • It is time to replace the lamp and clean the air filter. |
and clean the Filter. | |
| 51). |
| • When this message appears even after replacing the lamp, the |
| task has not been completed. |
| c Perform the operation of steps 10 to 13 on page 50. |
|
|
Caution Message
Message | Meaning and Remedy |
|
|
Not applicable! | You have pressed the wrong button. |
| c Press the appropriate button. |
|
|
48