Sony VPL-BW5 INPUT SETTING Menu, When the signal is input from a computer

INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the input signal.

When the signal is input from a computer

Adjust Signal...
Wide Mode:	Normal
Over Scan:	Off

Menus the Using

Setting items		Functions	Initial setting
Adjust Signal...
	Dot Phase	Adjusts the dot phase of the LCD panel and the	Set according to
		signal output from a computer.	the input signal
		Adjust the picture further for finer picture after the
		picture is adjusted by pressing the APA key.
	H Size	Adjusts the horizontal size of a picture output	Set according to
		from a computer.	the input signal
		Adjust the setting according to the dots of the input
		signal. (1 page 54)
	Shift	Adjusts the position of the picture.	Set according to
		H: As the setting for H (horizontal) increases, the	the input signal
		picture moves to the right, and as the setting
		decreases, the picture moves to the left. Use
		</, to adjust the horizontal position.
		V: As the setting for V (vertical) increases, the
		picture moves up, and as the setting decreases, the
		picture moves down. Use M/m to adjust the
		vertical position.
Wide Mode		You can set the aspect ratio of the picture to be	Set according to
(When the video		displayed for the current input signal. This item is	the input signal
signal is input)		enabled only when an video signal (preset
		memory numbers 1 to 11) is input.
		Normal: A picture with normal 4:3 aspect ratio is
		displayed in the center of the screen to fill the
		vertical screen size.
		Full: A picture squeezed to 4:3 is displayed with the
		correct aspect ratio. A 4:3 picture is enlarged
		horizontally to fit the 16:9 screen.
		Zoom: A normal 16:9 aspect ratio picture (SD signal
		only) is enlarged vertically and horizontally in the
		same ratio to fill the screen.
		Wide Zoom: A 4:3 aspect ratio picture (SD signal
		only) is enlarged over the entire screen properly.
		The upper and lower portions of the screen are
		slightly cut off.

37