Setting items | Functions | Initial setting |
|
|
|
Color System | Selects the color system of the input signal. | Auto |
| If you select “Auto,” the projector detects the color |
|
| system of the input signal automatically. If the |
|
| picture is distorted or colorless, select the color |
|
| system according to the input signal. |
|
|
|
|
Power Saving | Selects the Power Saving mode. | Off |
| Lamp off: The lamp goes off if no signal is input for |
|
| 10 minutes. The lamp lights again when a signal is |
|
| input or any button is pressed. |
|
| Standby: The projector goes into Standby mode if |
|
| no signal is input for 10 minutes. To use it, turn on |
|
| the power again. |
|
| Off: The projector does not go into Power Saving |
|
| mode. |
|
|
|
|
IR Receiver | Selects the remote control detectors (IR Receiver) | Front & Rear |
| on the front and rear of the projector. |
|
| Front & Rear: Activates both the front and rear |
|
| detectors. |
|
| Front: Activates the front detector only. |
|
| Rear: Activates the rear detector only. |
|
|
|
|
Lamp Timer | When replacing the lamps, reset the lamp timer. | – |
Reset |
|
|
Notes
•Press APA when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen.
-You can cancel the adjustment by pressing APA again while “Adjusting” appears on the screen.
-The picture may not be adjusted properly depending on the type of input signal.
-Adjust the “Dot Phase,” “H Size,” and “Shift” items in the INPUT SETTING menu when you adjust the picture manually.
•If the input signal is not displayed correctly when
40