INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING | |
V Keystone: | Auto |
Image Flip: | Off |
Background: | Blue |
Lamp Mode: | Standard |
High Altitude Mode: Off
Setting items | Functions |
| Initial setting |
|
|
| |
V Keystone | Corrects the trapezoidal distortion caused by the | Auto | |
| projection angle. |
| |
| Select “Auto” for automatic correction, or “Manual” for |
| |
| manual correction using the M/m/</, buttons. |
| |
| When the bottom of the trapezoid is longer than the |
| |
| top | : Sets a lower value. |
|
| When the top of the trapezoid is longer than the |
| |
| bottom | : Sets a higher value. |
|
|
|
| |
Image Flip | Flips the image on the screen horizontally and/or | Off | |
| vertically. |
|
|
| HV: Flips the image horizontally and vertically. |
| |
| H: Flips the image horizontally. |
| |
| V: Flips the image vertically. |
| |
| Off: The image does not flip. |
| |
|
|
| |
Background | Selects the background color of the screen when no | Blue | |
| signal is input. |
| |
| Select “Black” or “Blue.” Normally, set to “Blue.” |
| |
|
|
| |
Lamp Mode | Sets the lamp brightness used during the projection. | Standard | |
| High: Illuminates the projected image brightly. |
| |
| Standard: Reduces fan noise and power consumption. |
| |
| The brightness of the projected image will be lower |
| |
| compared with the “High” setting. |
| |
|
|
| |
High Altitude | Set to “On” when the projector is used at an altitude | Off | |
Mode | of 1,500 m or higher. |
| |
|
|
|
|
42