Tips

•You can select the desired language for the menu screen. For details, refer to “Step 4: Selecting the Menu Language”. (1 page 24)

•When “Auto Input Search” is set to “On” in the SET SETTING menu, the input terminal with effective signals is automatically displayed by pressing INPUT. (1 page 39)

5Adjust the upper or lower position of the picture.

Use the adjuster to adjust the picture position.

Using the adjuster

Lift the projector while pressing the adjuster adjustment button, and adjust the tilt of the projector, then release the button to lock the adjuster.

adjusted depending on the room temperature or the tilt of the screen. In this case, adjust it manually.

7Adjust the picture size using the zoom lever.8Adjust the focus using the focus ring.

Preparations and Connections

Adjuster adjustment button

Notes

•Be careful not to let the projector down on your fingers.

•Do not push hard on the top of the projector or do not drag it hard with the adjuster out. It may cause malfunction.

6Adjust the trapezoidal distortion of the picture.

The V Keystone adjustment is performed automatically when you adjust the tilt of the projector with the adjuster. If you do not want to perform the keystone adjustment automatically, set “V Keystone” in the INSTALL SETTING menu to “Manual.” (1 page 42)

Note

If you set “V Keystone” to “Auto,” the V Keystone correction is automatically adjusted. However, it may not be perfectly

23