Sony VPL-BW5 To clear the menu, If no signal is input, Storage of the settings, When changing the setting, Items that can be reset are:, Items that cannot be adjusted

Pop-up menu
	Menu	Setting items
	MENU SETTING			Input A
		Status:	On
		Language:	English	A
		Menu Position:	Top left
		Start Up Image	Bottom Left
			Center
			Top Right
			Bottom Right

Adjustment menu

Next menu window
Menu	Setting items
PICTURE SETTING		Input A
ADJUST PICTURE		Standard
Contrast:		80
Brightness:		50
Gamma Mode:		Off
Color Temp.:		High

4 Make the setting or adjustment of an item.

When changing the adjustment level

To increase the value, press M/,. To decrease the value, press m/<. Press to restore the previous screen.

When changing the setting

Press M/m to change the setting.

Press to restore the previous screen. You can restore the previous screen using < depending on the selected item.

Items that cannot be adjusted

Adjustable items differ depending on the input signal. The items that cannot be adjusted or set do not appear in the menu. (1 page 45)

To clear the menu

Press MENU.

The menu disappears automatically if a button is not pressed for one minute.

To reset the items that have been adjusted

Select an item that you want to reset, then press RESET on the remote control.

The message “Complete!” appears on the screen and the setting of the item that you have selected is reset to its factory preset value.

Items that can be reset are:

•“Contrast,” “Brightness,” “Color,” “Hue” and “Sharpness” in the “Adjust Picture...” menu of the PICTURE SETTING menu

•“Dot Phase,” “H Size,” and “Shift” in the “Adjust Signal...” menu of the INPUT SETTING menu

Storage of the settings

The settings are automatically stored in the projector memory when the button is pressed.

If no signal is input

If there is no input signal, the message “Cannot adjust this item.” appears on the screen.

34