Notes

•Be careful not to touch the glass surface of the lamp.

•The power will not turn on if the lamp is not secured properly.

•Do not allow any liquid or other objects into the slot to avoid electrical shock or fire.

6Close the lamp cover and tighten the screw.

Note

Be sure to attach the lamp cover securely as it was. If not, the projector cannot be turned on.

7Turn the projector back over.8Connect the power cord.

The ?/1 switch lights in red.

9Press the ?/1 switch to turn the projector on.10Press MENU, and select the SET SETTING menu.11Select “Lamp Timer Reset”, and press .

SET SETTING

Input-A

Smart APA:

On

Auto Input Search: Off

Input-A Signal Sel.: Auto

Color System:

Auto

Power Saving:

Off

IR Receiver:

Front & Rear

Lamp Timer Reset

 

12Select “Execute” with m, and press .

The Lamp Timer is initialized to 0, and “Change the Lamp and clean the Filter?” is displayed in the menu screen.

Change the Lamp and clean the Filter?

Yes: No:

Refer to page 51 for “Cleaning the Air Filter”.

13Select “Yes” with M.

“Lamp Timer Reset Complete!” is displayed in the menu screen.

Disposal of the used lamp

Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).

50