Step 3: Adjusting the Picture Position

Project an image on the screen and adjust the picture position.

1,2 4 6

8

7

Rear remote

control detector

 

1 5

4

2

6

1After connecting the AC cord to the projector, plug the AC cord into a wall outlet, connect all equipment, and remove the lens cover.

The ?/1 (On/standby) switch lights in red and the projector goes into standby mode.

2Press the ?/1 (On/standby) switch to turn on the projector.

The ?/1 (On/standby) switch flashes in green, then lights in green.

3Turn on the equipment connected to the projector.

Refer to the operating instructions of the connected equipment.

4Press INPUT to project the picture on the screen.

Each time you press the button, the input indication and equipment to be projected change. (1 page 27)

22