Step 2: Connecting the ProjectorWhen making connections, be sure to do the following:

•Turn off all equipment before making any connections.

•Use the proper cables for each connection.

•Insert the cable plugs properly; plugs that are not fully inserted often generate noise. When pulling out a cable, be sure to pull it out from the plug, not the cable itself.

•Refer to the operating instructions of the connected equipment.

Connecting to a DVD Player/Recorder or Digital Tuner

To connect to a DVD player/recorder or digital tuner equipped with component video connectors

Speakers

AV amplifier

Right side of the projector

DVD player/recorder, HDD recorder, digital tuner, etc., with component video connectors

 

 

 

 

 

INPUT

 

S VIDEO

VIDEO Y

 

 

CB/PB CR/PR

INPUT A

 

 

 

 

 

 

 

 

 

 

Y CB/

CR/PR

Y PB/

PR/

CB

CR

PB

 

 

 

 

Component video cable (not supplied)

: Video signal flow

Tip

To connect the projector to a DVD player/recorder, HDD recorder, digital tuner, etc. which is not equipped with component video connectors, it is recommended to use the S video cable to connect to the S-video output of the DVD player/recorder, HDD recorder, digital tuner, etc. If the connected equipment is not equipped with the S-video output connector, use the video cable to connect to the video output jack on the equipment.

GB 18 Step 2: Connecting the Projector