Others

This section describes how to solve the problems, how to replace a lamp and air filter, etc.

Troubleshooting

If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel.

Power

Symptom

Cause and Remedy

The power is not turned on. c Close the top cover and the lamp cover securely. (1 page 63)

cReset the lamp release lever to its original position. (1 page 65)

cClose the filter holder securely. (1 page 67)

cCheck warning indicators. (1 page 60)

Picture

Symptom

Cause and Remedy

 

 

 

No picture.

c Check that the proper connections have been made. (1 page

 

18)

 

 

 

 

 

c Select the input source correctly using the INPUT button. (1

 

page 30)

 

 

 

 

 

c Set the computer signal to output from an external monitor.

 

c Set the computer signal to output only to an external monitor.

 

c Select “Computer,” “Component” or “Video GBR” for “Input-A

 

Signal Sel.” and “DVI Signal Sel.” on the Setup

menu

 

according to the input signal. (1 page 53)

 

 

 

The picture from the

c Select “Computer,” “Component” or “Video GBR” for “Input-A

IINPUT A connector is

Signal Sel.” on the Setup

menu according to the input

colored strange.

signal. (1 page 53)

 

 

 

 

 

The picture from the DVI-

c Select “Computer,” or “Video GBR” for “DVI Signal Sel.” in

D connector is colored

the Setup

menu according to the input signal. (1 page 53)

strange.

 

 

 

 

 

 

 

The picture from the

c Adjust the picture in the “Adjust Picture” of the Picture

VIDEO INPUT or

menu (1 page 44)

 

 

 

S VIDEO INPUT

c Set “Color System” in the Setup

menu to match the color

connector is colored

system being input. (1 page 54)

 

 

strange.

 

 

 

 

 

The picture is too dark. c Adjust the contrast or brightness in the “Adjust Picture” of the

Picture menu properly. (1 page 44)

Others

Troubleshooting 59 GB